Philips 24PFL3603 - Sound Settings

SOUND
1
Press  and use  to select SOUND, then press OK.
SOUND SOUND
Sound Mode
Treble
Bass
Balance
MTS
Audio Languages
Digital Audio Output
Surround Sound
AVL
Standard
Stereo
English
RAW
Off
Off
Move Move
Select Select
Adjust Adjust
Back Back
2
Use  to select the item you want to adjust, then press
OK.
Sound Mode
To select the desired setting, then press OK.
(Standard, User, Movie, Sports or Music)
The bass, treble and balance are only available
in User mode.

 Cursor Cursor 
Treble
Adjust the treble effect. Increases or decreases
high-pitched sounds.
Bass
Adjust the bass effect. Increases or decreases
lower-pitched sounds.
Balance
Adjust the balance between left and right
speakers to adapt to your listening position.
You can set the output mode as a default for the sound mode (Analog
TV only).
This setting is not interlocked when you change the output mode by
pressing SAP. Refer to Switching audio mode p.17.
MTS
Mono To output mono audio
Stereo To output stereo audio
SAP To output second audio program
Select the language supported by the chosen digital channel. It is
available only in TV source.
Audio Languages
To set your preferred language in the audio
streaming (English, Spanish or French).
You can select audio output through a digital audio output connector.
Digital Audio
Output
Off
To set Digital Audio Output to
Off
PCM To output PCM format
RAW Original image coded date
Select the speaker sound effect to be surround or not.
Surround Sound
Off To set Surround Sound to Off
On To set Surround Sound to On
This function keeps a constant loudness level between the TV
commercials and the programs.
AVL
Off To remove the AVL
On
To reduce volume differences
between the TV commercials
and the programs
22 .English
Continued on next page.