Meridian 3
65
5.13 Gap, step of F/C and R/C
5.14 Monitor slant
5.15 Gap of Bezel opening around display area
5.16 Tilt and Swivel Base
5.17 Kensington Lock
5.18 Label
5.19 Product Dimension / Weight (refer to Philips approved SHT191)
5.20 Transportation
5.21 Pallet / Container Loading (refer to Philips approved SHT560)
6. Environmental Characteristics
6.1 Susceptibility of Display to External Environment
6.2 Transportation Tests
6.3 Display Disturbances from External Environment
6.4 Display Disturbances to External Environment
7. Reliability
7.1 Mean Time between Failures
8. Quality Assurance Requirements
8.1 Acceptance Test
9. Philips’ Flat Panel Monitors Pixel Defect Policy
10. Regulatory Compliance
10.1 Worldwide Regulatory
10.2 EMC Requirements
10.3 RoHS
10.4 WEEE
10.5 Ongoing Regulatory
To Next Page
