!
66
Meridian 3
1. Foreword
This specification describes a 27Ǝ FHD multi-scan color TFT LCD monitor with maximum resolution up to 1920 x
1080 /60Hz non-interlaced.
All optical characteristics (including WHITE-D, brightness, and so on) are determined according to panel
specification after warming up approximate 30 minutes that brightness stability is optimal, and follow strictly after
panel specification.
2. Product Profile
This display monitor unit is a color display monitor enclosed in PHILIPS styling cabinet which has an integrated
tilt base.
2.1 EDID Header
Data for EDID & .inf file
1 User visible strings on .inf file Philips 273E3LH (27inch WIDE LCD MONITOR 273E3LH)
2 Manufacturer ID ( EDID data) PHL
3 Product ID, "xxxx" 4 codes MSB(byte 12): C0
LSB (byte 11): 7D
4 maximum resolution 1920 x 1080
5 Horizontal Frequency Range 30~83 KHz
6 Vertical Frequency Range 56~76Hz
7 Monitor Name (13 characters max.) 273E3LH
2.2 LCD
CMO 27 (1st source)
Type NR. : M270HGE-L10
Resolution : 1920 x 1080 (FHD)
Outside dimensions : 630 (H) x 368.2 (V) x 16.2 (D) mm (typical)
Pitch (mm) : 0.2715 mm x 0.2715 mm
Color pixel arrangement : 1920 horizontal by 1080 vertical pixels. RGB strip arrangement
Display surface : Hard coating (3H), Anti-Glare treatment of the front polarizer haze 25
Color depth : 16.7M colors
Backlight : LED
Active area (W x H) : 597.89 (H) × 336.31 (V) mm
View angle (CR>=10) : R/L 170 (typ.), U/D 160 (typ.)
Contrast ratio : 800:1 (min.), 1200:1 (typ.)
White luminance : 300 cd/m
2
(Typ. Center 1 point)
Color gamut : >=72%
Gate IC : N/A
Source IC :
Response time : <=5 ms (typ.)
To Next Page
