Philips 273E3LHSB/00 - DDC;CI Support; DVI;HDMI Display Identification; Hot-Key Definition; Power Management

!
72
Meridian 3
1.7 Power management
The monitor must comply with the Microsoft On Now specification, and meet EPA requirements.
Mode HSYNC VSYNC Video Pwr-cons. Indication Rec. time
Power-On On On Active
< 40 W (typ.)
< 48 W (max.)
EPA5.0< 37.3
White LED --
Standby Off Off Blanked < 0.5 W
Blinking white LED
Period 3ec on, 3sec off
< 3 s
DC Power Off N/A < 0.3 W LED Off
Power Saving <14 s
1.8 VGA Display Identification
In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability
1.9 DVI/HDMI Display Identification
In accordance with HDMI requirement (DDWG digital Visual Interface revision 1.0) use DDC-2B, DDC/CI, and
EDID V1.3
1.10 DDC /CI Support
In accordance with VESA DDC/CI and MCCS ver.2.0
1.11 Hot-key definition
026'%XWWRQ
GHILQLWLRQB
1.12 Smart contrast (Dynamic Contrast Ratio)
Smart Contrast is a kind of backlight control.
6PDUW,PDJH
3URILOH'HILQLWLR
This function changes the panel backlight according to the frame brightness histogram.
At least the minimum contrast ratio has to be > 2000K: 1 (typ.).
1.13 Audio
3.13.1 Frequency Response
The amplifier and speaker combination shall provide a frequency response of 300 Hz to 20 kHz, with +/- 3 dB
variation over the entire response range.
3.13.2 Total Harmonic Distortion
Total harmonic distortion shall be limited to 5% THD at the maximum wattage speaker rating specified in
section 1.3, at 1 kHz, when the input is 1.3Vrms.
3.13.3 Power Handling
Each speaker transducer shall accept up to the specified Wattage of audio power without damage or
exceeding the frequency response and total harmonic distortion specifications.