Philips 27M1C5500VL - Operating the Monitor

6
3
Connecting to your PC
Earphone-Hang
1
2 3 64 5
1
Kensington anti-theft lock
2
HDMI 1 input
3
HDMI 2 input
4
DisplayPort input
5
Audio Out
6
AC power input
Connect to PC
1. Connect the power cord to the back
of the monitor rmly.
2. Turn o your computer and unplug
its power cable.
3. Connect the monitor signal cable to
the video connector on the back of
your computer.
4. Plug the power cord of your
computer and your monitor into a
nearby outlet.
5. Turn on your computer and monitor.
If the monitor displays an image,
installation is complete.
2.2 Operating the monitor
1
Description of the control buttons
Press to switch power on.
Press more than 3 seconds to
switch power o.
Access the OSD menu .
Conrm the OSD adjustment.
Adjust the Game Setting.
Adjust the OSD menu.
Change the signal input
source.
Adjust the OSD menu.
SmartImage Game menu.
There are multiple selections:
FPS, Racing, RTS, Gamer 1,
Gamer 2, LowBlue Mode,
EasyRead and O.
When the monitor receives
HDR signal, SmartImage
will show HDR menu. There
are multiple selections: HDR
Game, HDR Movie, HDR
Photo, Personal, and O.
Return to previous OSD level.