12
Use timers
You can set timers to switch the TV to standby
at a speci ed time.
Tip
Set the TV clock before you use timers. •
Automatically switch the TV to
standby (sleep timer)
Sleep timer switches the TV to standby after a
pre-de ned period of time.
Tip
You can switch off your TV earlier or reset the •
sleep timer during the countdown.
1 Press MENU .
2 Press to select [Setup] >
[Features] > [Sleep timer] .
The » [Sleep timer] menu appears.
3 Press to set the sleep time.
The sleeptimer can be up to 180 »
minutes in steps of ve minutes. If set
to zero, the sleep timer is switched off.
4 Press OK to switch on the sleep timer.
The TV switches to standby after the »
speci ed time.
Automatically switch the TV on (on
timer)
You can switch on the TV from standby to a
speci c channel at a speci ed time.
1 Press MENU .
2 Press to select [Setup] >
[Features] > [On timer] .
3 Press to enter the [On timer] menu.
• [Activate] : Selects how often the TV
is switched on.
Note
All favourite channels are marked by an •
asterisk in the channel grid.
Remove a channel from a favourite
list
1 When watching TV, press OK .
The channel grid appears. »
2 Press to select a channel to
remove.
3 Press OPTIONS .
4 Select [Unmark as fav.] , then press OK .
The channel is removed. »
Use the TV clock
You can display a clock on the TV screen.
(RF only)
Set the TV clock
1 Press MENU .
2 Select [Setup] > [Features] > [Clock]
The » [Clock] menu appears.
3 Press or the Numeric buttons to
enter the time.
4 Select [Done] and press OK to con rm.
5 Press MENU to exit.
Display the TV clock
1 When watching TV, press OPTIONS .
The TV option menu appears. »
2 Select [Clock] .
3 Press OK .
Note
To disable the clock, repeat the above •
procedure.
EN