EN-38
Use Philips EasyLink10
Your TV is enabled for HDMI-CEC connections
with other devices. The following descriptions
apply to devices that are CEC-compliant and
connected to your TV through an HDMI cable.
One-touch play
When you connect your TV to devices that
support One-touch play, you can control your
TV and the devices with one remote control.
For example, when you press one-touch play
on your DVD’s remote control, your Philips TV
will automatically switch to the correct channel
to show the DVD content.
One-touch standby
When you connect your TV to devices that
supports one-touch standby, you can use your
TV’s remote control to put the devices to
standby. To put a device into standby, press and
hold the . button on the TV’s remote control
for 3-4 seconds.
To Next Page
Loading...
