Picture style > Film detection method.
The TV will automatically set to your preferred AI Picture
style when film content is detected. You can set the film
detection method by Using AI or Using content
signalling.
Ambient Intelligence
Light level optimisation
Settings > Display and sound > Picture > Light level
optimisation.
Switch on to automatically reduce eye strain under
different ambient light conditions.
Dark detail optimisation
Settings > Display and sound > Picture > Dark detail
optimisation.
Select on to automatically enhance dark details based on
the ambient light conditions.
Colour temperature optimisation
Settings > Display and sound > Picture > Colour
temperature optimisation.
Select on to automatically optimise the colour
temperature based on the ambient light conditions.
HDR optimisation
Settings > Display and sound > Picture > HDR
optimisation.
Select on to automatically optimise the HDR tone
mapping effect based on the ambient light conditions.
More Picture Settings
Contrast
Brightness
Ambient Light Level Optimisation
Settings > Display and sound > Picture > Contrast
> Brightness > Ambient light level optimisation.
Switch on to adjust the picture settings automatically to
the lighting conditions of the room.
OLED Contrast
Settings > Display and sound > Picture > Contrast
> Brightness > OLED contrast.
Adjust the contrast value of the picture. You can
decrease contrast value to reduce power consumption.
Light Boost
Settings > Display and sound > Picture > Contrast
> Brightness > Light boost.
Select Off, Minimum, Medium or Maximum to set the
TV automatically reduces the contrast, for best power
consumption or for best picture experience.
Video Level
Settings > Display and sound > Picture > Contrast
> Brightness > Video level.
Adjust the video contrast level.
Dark Details
Ambient Dark Detail Optimisation
Settings > Display and sound > Picture > Contrast >
Dark details > Ambient dark detail optimisation.
To automatically enhance dark details based on the
ambient light conditions.
Gamma
Settings > Display and sound > Picture > Contrast >
Dark details > Gamma.
To set a non-linear setting for picture luminance and
contrast.
Note: Not available on some models when Ambient
dark detail optimisation or Dark detail optimisation is
set to On.
Black Level
Settings > Display and sound > Picture > Contrast >
Dark details > Black level.
To set the black level of picture.
Note: Setting of black level much away from reference
value (50) may result lower contrast (dark detail
disappear or black picture become grey).
37
To Next Page
Loading...
