Philips 960 - Settings

20 Browser
Settings
This feature allows you to customize the settings of
the way you connect to your WAP service. You can
create a number of profiles with different settings.
Edit WAP parameter
WAP push setting
WAP Push is a service for the asynchronous delivery
of content to the mobile device. Use this menu to turn
on or off the reception of message broadcast on your
network and/or from your service provider. Or you
may specify to allow SMS centers from specific area to
send you the messages. From main menu > Brower >
Settings > Push messages.
Press To
L
Select Main menu > Browser > Settings >
WAP profiles
R
Options Go to WAP parameter and edit
details.
Options Description
Name To name the current profile
IP address To enter the IP address of your WAP
service
Port To enter the IP port number of your
WAP service. This is usually port
number 9201.
Homepage To enter a WAP site address to
which you will connect directly
when connecting using the related
profile.
Linger time When you have reached the
inactivity timeout (in seconds), your
phone will automatically close the
WAP connection.
Connection To toggle between different way to
connect to the WAP service: Auto,
CSD or GPRS. If the GPRS network
is not available upon connection, a
message will ask you if a CSD
connection should be made instead.
CSD
profiles
Toggle between different CSD
profiles that you have defined in
Connectivity.
GPRS
profiles
To toggle between different GPRS
profiles that you have defined in
Connectivity.