Getting Started 7
Slide the battery back into the compartment with
metallic connectors downwards, until it stops. Then
lock it by pushing it downwards.
Replace the back cover by pushing it down into its
slots, until it stops.
Remove the protective film covering the screen and
the camera lens before using the phone.
Insert an SD/MMC Card
Ensure your phone is turned off first in order prevent
accidental static discharge from the battery corrupting
your SD/MMC card memory. Next, press down the
latch (1) and then lift up the door of the battery
compartment (2).
Hold the phone so that the camera lens faces you, and
then hold the SD/MMC card with its notched edge in
the lower right-hand side position (1). If held
properly, the card's gold contacts will be facing you
from the bottom side of the card. Gently slip the card
into the SD/MMC card slot at the top of the phone
(2). Press down until the card locks into place.