Philips AC3036 - Initial Wi-Fi Setup Process

5EN
English
3 Getting started

Remove all packaging of the lter before rst use.
Note: Make sure the air purier is unplugged from the electrical outlet before installing the lter.
1 Pull the back cover and remove it from the appliance (g c).
2 Pull the lter from the appliance (g d).
3 Remove all packaging materials of the air purication lter (g e).
4 Put the lter back into the appliance (g f).
5 Reattach the back cover (g g).

 
Blink in orange Connecting to the smartphone
Stable in orange Connected to the smartphone
Blink in white Connecting to the server
Stable in white Connected to the server
O Wi-Fi function disabled

Note:
•
Corporate/Enterprise networks (e.g. certicates, network proles) are not supported. We
recommend setting up the Philips Air Puriers on a dedicated network created for IoT devices or
WPA2-Personal networks.
•
Conguration details are provided in the Clean Home+ app (e.g. Mac address) to help set-up on
managed networks.

1 Download and install the Philips “Clean Home+” app from the App Store or
Google Play�
2 Put the plug of the air purier in the power socket and touch to turn on the air
purier.
» The Wi-Fi indicator blinks orange for the rst time.
3 Make sure that your smartphone or tablet is successfully connected to your Wi-Fi network.
4 Launch the “Clean Home+” app and click on “Connect a New Device” or press the “+” button on
the top of the screen. Follow the onscreen instructions to connect the air purier to your network.
Note:
•
Enterprise/Additional webpage authentication networks are not supported.
•
This instruction is only valid when the air purier is being set up for the rst time. If the network has
changed or the setup needs to be performed again, see Chapter “Reset the Wi-Fi connection” on
page 6�