Philips AC3036 - Powering On and Off; Selecting Day Mode Settings; Configuring Night Mode Settings

7EN
English
GAS
With an advanced gas sensor, a display ranging from L1 to
L4 shows the level change of potential harmful gases (incl.
VOC, odor, etc.) detected. L1 indicates best air quality.

Note:
•
For optimum purication performance, close doors and windows.
•
Keep curtains away from the air inlet or air outlet.
1 Put the plug of the air purier in the power socket.
2 Touch to switch on the air purier.
» The air purier beeps.
» The “ ” displays on the screen during warming up. Then the air purier shows the IAI/
PM2.5/Gas level after measuring the air quality.
» The air purier operates in the auto mode with IAI displayed on the screen (g h).
3 Touch and hold the button for 3 seconds to switch o the air purier.
Note: If the air purier stays connected to the electrical outlet after turning OFF, the air purier will
operate under the previous settings when turned ON again.
Changing the day mode setting
You can choose Auto mode, speed 1, speed 2 or Turbo mode by touching the button.
  In Auto mode, the dual-sensor senses the air quality in real-time and the appliance
automatically adjusts the fan speed in accordance with the ambient air quality. The control panel can
automatically adjust display screen brightness according to the ambient light (g i).
 &  In manual mode, the air purier operates on speed 1 or speed 2 (g j).
  In Turbo mode, the air purier operates on the highest speed (g k).
Changing the night mode setting
You can choose normal Sleep mode or Allergy Sleep mode by touching the button.
Normal Sleep mode: In normal Sleep mode, the air purier operates quietly at a low speed. After
3 seconds, the button dims, all lights and buttons are o (g l).
  In Allergy Sleep mode, the air puriers responds to night-time dust events
and switches the device to a more powerful mode– while keeping the sound level suitable for sleep.
The indicator displays on the screen. The and dims, other buttons are o (g m).
Touch any button to wake up from the sleep mode. Then, if no further operation within 3 seconds, all
lights will be dim again.
Gas level Air quality light color
L1 Blue
L2 Blue-purple
L3 Purple-red
L4 Red