Philips AC4080 - Set Air Quality Sensor Sensitivity

11
EN
2
After a short while, put the plug in the wall
socket again.
3 Press and hold the fan speed button
and humidier button
simultaneously
f
or 3 seconds.
»
One or more fan speed lights flash to
show the current sensitivity level of the
air quality sensor.
3”
Fan speed light Sensitivity level
+ standard
sensitive
extra sensitive
4 Press the fan speed button to adjust
the sensitivity level of the air quality
sensor.
5 Press and hold f
or 2 seconds to save
the setting and switch off the appliance.
Note
•
When you are changing the sensitivity level, if
you do not change any settings, or if you do not
press for 2 seconds after you have changed any
settings, the appliance will resume normal work
without saving any changes.
•
After the sensitivity is changed and saved, the
appliance automatically starts operating at the
preset sensitivity level whenever you switch on
the appliance.