Philips AC4080 - Replacing Filters; Healthy Air Protect Lock; Replace Filter 2

19
EN
6 Replace the filters
Understand the healthy air
protect lock
This appliance is equipped with the healthy
air protect lock to make sure that the lters
are in optimal condition when the appliance is
operating. When the lter is almost full and has
to be replaced, the specic lter light (
/ )
start to flash.
When you do not replace the lter in time:
»
The appliance stops operating and it is
locked.
»
The specic lter light (
/ ) illuminate
continuously.
Note
•
The appliance is locked after the lter light has
flashed for approximately 2 weeks.
Replace filter 2
Note
•
Filter 2 is not washable nor vacuum cleanable.
Replace lter 2 when the lter light starts
flashing.
1
Remove the used lter 2 from the
appliance.
2
2
AC4080 AC4081
2
Remove all packaging material from the new
lter 2.
3
Put the new lter 2 into the appliance.
2
2
AC4080 AC4081
4
After the pre-lter is put back in the
appliance, reset the lter 2 lifetime counter.
(Refer to chapter 9 "Reset the lter lifetime
counter")