Philips AC4080 - Sleep Mode; Set the Timer; Set the Humidity Level

13
EN
Sleep mode
In sleep mode, the appliance operates very
quietly.
•
Press the fan speed button
to select the
sleep mode.
»
The sleep indicator lights up.
To change to another fan speed, press the fan
speed button
.
Note
•
When the appliance switches to sleep mode,
the indicators goes out after 1 minute, and the
appliance keeps working.
Set the timer
With the timer function, you can let the
appliance operate for a set number of hours.
When the set time has elapsed, the appliance
automatically switches off.
1
Press the timer button to activate the
timer.
»
The timer light
（
, or ) goes on.
2
Press the timer button repeatedly to
choose the number of hours you want the
appliance to operate. The corresponding
timer light goes on.
To deactivate the timer function, press the timer
button
repeatedly until the timer light (
,
or
) goes out.
Set the humidity level
Note
•
Make sure that the water tank is lled with
water when you want to use the humidication
function (see the chapter "Get started", section
"Prepare for humidication").
•
Press the humidity button once or
more times to set the desired air humidity
to
40%
,
50%
or
60%
.
»
The corresponding humidity light (
40%
,
50%
or
60%
) starts to flash.
»
When the appliance reaches the target
humidity level, the humidity level
indicator remains on.
Note
•
If you want to increase the humidity level in
shorter time, you can select a higher fan speed.