Philips AC4080 - Change the Working Mode

10
EN
2
Press again to activate the humidication
function again.
Note
•
In air purication only mode, the humidication
button does not respond.
•
The appliance cannot work under humidication
only mode.
Set the sensitivity of the air
quality sensor
This appliance allows you to adjust the
sensitivity of the air quality sensor. There are
three sensitivity levels:
•
standard (default setting)
•
sensitive
•
extra sensitive
You can adjust the sensitivity of the air quality
sensor in the following way:
Note
•
When the appliance is set to a higher sensitivity,
the purier becomes more allergic to the
pollutants in the air. When the purier is in
AUTO
mode, it is more likely to choose a higher
fan speed than the standard mode. The air
quality sensor selects the appropriate color of
the air quality light in accordance with the higher
sensitivity.
1 Unplug the appliance.
3
Press for 2 seconds to switch off the
appliance.
2”
Note
•
After the appliance is switched off by the
on/off button
, if the plug is still in the
power socket, the appliance will resume
work based on the last settings when it is
switched on again.
Change the working mode
Besides operating under air purication
combined with humidication, the appliance can
also work under air purication only mode.
1
After the appliance is switched on, press
once, and the humidication indicator
goes out with the humidity level indicator.
The humidication function is deactivated.
The appliance works under air purication
only mode.