5
Rinse the water tank under a running tap.
Note
•
If necessary, use a mild detergent to clean the
water tank. In this case, rinse the water tank
thoroughly.
6
Dry the water tank and its lid with a soft,
dry cloth.
7
Put the lid back onto the water tank and
fasten the locks.
8
Put the humidication lter back into the
water tank.
9
Put the water tank back into the appliance.
Clean the pre-filter and
descale the humidification
filter
Filter alert light status Follow this
Filter light
/ goes on Clean the pre-lter
and descale the
humidication lter
Note
•
Only the pre-lter and humidication lter are
washable. Filter 2 is not washable.
Filter light / goes on
1
Wash the pre-lter under a running tap. If the
pre-lter is very dirty, use a soft brush to brush
away the dust.
2
Air dry the pre-lter.
Note
•
Make sure that the pre-lter is completely dry.
If it is still wet, bacteria may multiply in it and
shorten the lifetime of the pre-lter.