Philips AC4236/10 - Turning on and off

8 EN
IAI
The professional-grade AeraSense sensor detects
the level of indoor air allergen and with numerical
feedback from 1 to 12 the potential risk level of
indoor air allergens can be displayed� 1 indicates
best air quality�
PM2�5
AeraSense sensing technology accurately detects
and quickly responds to even the slightest
particle change in the air� It provides you with
reassurance with real-time PM2�5 feedback�
Most of the indoor air pollutants fall under PM2�5
– which refers to airborne particle pollutants
smaller than 2�5 micrometers� Common indoor
sources of ne particles are tobacco smoke,
cooking, burning candles� Some airborne
bacteria and the smallest mold spores, pet allergen and dust mite allergen particles also fall
under PM2�5�
GAS
With an advanced gas sensor, a display ranging from
L1 to L4 shows the level change of potential harmful
gases (incl� VOC, odor, etc�) detected� L1 indicates best
air quality�
Turning on and o
Note:
• For optimum purication performance, close doors and windows�
• Keep curtains away from the air inlet or air outlet�
1 Put the plug of the air purier in the power socket�
2 Touch to switch on the air purier�
» The QR code for App is displayed on the screen for the rst use, you can scan it and
download the App�
» The air purier operates in the auto mode with IAI displayed on the center of the
screen�
» After measuring the air quality, the air purier automatically switches to the display
which has the highest readings among PM2�5, IAI and Gas (g h)�
3 Touch and hold the button for 3 seconds to switch o the air purier�
IAI level Air quality light color
1-3 Blue
4-6 Blue-purple
7-9 Purple-red
10-12 Red
PM2�5 level Air quality light color
≤12 Blue
13-35 Blue-purple
36-55 Purple-red
>55 Red
Gas level Air quality light color
L1 Blue
L2 Blue-purple
L3 Purple-red
L4 Red