Philips AE 3650 - Tuning to Radio Stations; Automatic Station Tuning; Manual Station Tuning; Preset Station Management

Tuning Preset stations
TUNING TO A STATION
There are two possibilities for tuning in to a station:
— Automatically - the stations are sought automatically.
— Manually - This is easy if the frequency of the station is already
known (e.g. from your radio and television guide).
Automatic tuning
e Keep TUNING UP (+) or DOWN () pressed down until the frequency
on the display changes continuously.
— Tuning will stop automatically as soon as a station is found.
e Repeat this until you have found the desired station.
Manual tuning
e Keep TUNING UP (+) or DOWN () pressed down until you come
close to the desired frequency.
e Then briefly press the other TUNING button ; tuning will stop.
e Then press TUNING UP (+) or DOWN (-) repeatedly until you reach
the desired frequency.
PRESET RADIO STATIONS
You can programme 20 stations into the memory, 5 on each waveband.
Programming
e Press POWER button to switch on the radio.
e Tune to a radio station automatically or manually.
e Press the PROGRAM (P) button.
— The “P” sign starts flashing on the display.
Press one of the preset buttons to store the selected station.
Press PROGRAM (P) button again to complete the storing procedure.
The program indicator “P” disappears from the display, and the
preset number that was stored is shown in the right corner of the
display.
e Repeat these steps for the other stations you wish to programme.
12