Philips AE 3650 - Alarm Clock Function; Alarm Clock Functionality; Setting the Alarm Time; Activating the Alarm

Alarm
ALARM FUNCTION
You can use your world receiver as an alarm clock. To use this function
you first have to set the alarm time. You will be woken with a bleep, or
by the radio.
pening the alarm time
e Press TIME SET once to select the display in alarm time mode.
— The alarm sign will start flashing on the display.
e Keep TIME SET pressed while the alarm sign is flashing until the
alarm time digits start flashing.
e Keep TUNING UP (+) or DOWN (-) (+ for setting minutes, - for setting
hours) pressed until the alarm time on the display changes
continuously.
e Release TUNING UP (+) or DOWN (-) as soon as you come close to
the desired alarm time.
e Then press TUNING UP (+) or DOWN (-) repeatedly.
The alarm time will now change step by step until you reach the
desired alarm time.
— After 5 seconds the display will return to the previous situation.
e Select the alarm mode by switching RADIO-BUZZ.
Switching the alarm on
e Press ALARM.
— The alarm sign will appear on the display:
Switching the alarm off
e To switch of the alarm permanently, press ALARM.
— The alarm sign will disappear.
e When the alarm sounds, you can also switch the alarm off by
pressing the POWER button.
14
mama ar rm FF eg mini ME THERE a mim pi O im im
4