Philips AJ2000 - 5 Set Alarm Timer; Set Alarm; Activate;Deactivate Alarm Timer; Snooze the Alarm

9EN
5 Set alarm timer
Set alarm
You can set two alarms to ring at different time.
Note
• Make sure that you have set the clock correctly.
1 In standby mode, press and hold or
for two seconds to activate alarm setting
mode.
» The hour and minute digits and the
alarm icon ( or ) begin to blink.
2 Press HOUR and MIN repeatedly to set
hour and minute.
3 Press or toconrm.
4 Press HOUR or MIN to select alarm source:
buzzer or your last listened FM station.
5 Press or againtoconrm.
Tip
• The alarm volume is not adjustable, but will go up
gradually to gently wake you up.
Activate/deactivate alarm timer
Press or repeatedly to activate or
deactivate the alarm timer.
» The alarm icon ( or ) appears if
the alarm timer is on and disappears
if it is off.
• To stop the alarm, press the
corresponding or .
» The alarm repeats itself in subsequent
days.
Snooze the alarm
When the alarm goes off, press SNOOZE.
» The alarm snoozes and repeats ringing
nine minutes later.