Philips AJ2000 User Manual

7EN
4 Listen to FM
radio
Prepare FM antenna
For better reception, fully extend and adjust the
position of the pig-tail antenna.
Note
• To prevent interference, position the antenna as far as
possible from any other electrical appliances.
Tune to FM radio stations
1 Press RADIO to turn on FM radio.
2 Press and hold - TUNING + for two
seconds.
» The clock radio tunes to a station with
strong reception automatically.
3 Repeat step 2 to tune to more radio
stations.
To tune to a station manually:
In tuner mode, press - TUNING + repeatedly
to select a frequency.
Store FM radio stations
automatically
Note
• You can store a maximum of 30 FM radio stations.
In FM tuner mode, press and hold SCAN for
two seconds.
» The clock radio stores all the available
FM radio stations automatically.
» Therstavailablestationbroadcasts
automatically.
Store FM radio stations
manually
Note
• You can store a maximum of 30 FM radio stations.
1 In FM tuner mode, tune to an FM radio
station.
2 Press and hold PRESET for two seconds.
» The preset number begins to blink.
3 Press HOUR or MIN to select a number.
4 Press PRESETtoconrm.
5 Repeat steps 1 to 4 to store other stations.
Note
• To remove a pre-stored station, store another station
in its place.
Select a preset FM radio
station
In FM tuner mode, press PRESET repeatedly to
select a preset radio station.

Philips AJ2000 Specifications

General

Radio type	Clock
Tuner type	Digital
Auto digital tuning	Yes
Supported radio bands	FM
Display type	LED
MP3 playback	No
Product color	Mirror, White
Country of origin	China
Number of alarm times	2
Input voltage	100-240 V
Frequency range	87.5 - 108 MHz
Apple docking compatibility	Not supported
Power source	AC
AC input frequency	50 - 60 Hz
Number of built-in speakers	1
Package type	Box
Package depth	95 mm
Package width	233 mm
Package height	96 mm
Package weight	382 g
RMS rated power	- W
Harmonized System (HS) code	85271900

Weight and Dimensions

Depth	81 mm
Width	185 mm
Height	85.2 mm