Philips AJT5300 - Use Bluetooth devices; Connect a device; Play audio from Bluetooth-enabled device

8 EN
6 Use Bluetooth
devices
With this clock radio, you can listen to audio
from Bluetooth-enabled devices and control the
incoming call through Bluetooth.
Connect a device
Note
• Make sure that your Bluetooth device is compatible
with this product.
• Before pairing a device with this product, read its user
manual for Bluetooth compatibility.
• This product can memorize a maximum of 4 paired
devices.Thefthpaireddevicewillreplacetherstone.
• Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
• The operational range between this product and a
Bluetooth device is approximately 10 meters (30 feet).
• Any obstacle between this product and a Bluetooth
device can reduce the operational range.
• Keep away from any other electronic device that may
cause interference.
1 Press SOURCE repeatedly to select
Bluetooth mode.
» [BT] (Bluetooth)ashesonthedisplay.
2 On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
(refer to the user manual of the device).
3 When [Philips AJT5300] is displayed on
your device, select it to start pairing and
connection. If necessary, enter default
password “0000”.
Philips AJT5300
• Ifyoucannotnd[Philips AJT5300]
for pairing, press and hold for two
seconds to enter pairing mode, and
then try again.
» After successful pairing and connection,
[BT] (Bluetooth)stopsashing,and
the clock radio beeps twice.
To disconnect the Bluetooth-enabled device:
• Press and hold for two seconds;
• Disable Bluetooth on your device; or
• Move the device beyond the
communication range.
To connect another Bluetooth-enabled device:
1 Press and hold for two seconds to
disconnect the currently connected device.
» The clock radio enters Bluetooth
pairing mode.
2 Connect another Bluetooth device.
Bluetooth icon behavior Description
Flashingquickly Waiting for pairing
Flashing slowly Connecting
Solid on Connected
Play audio from Bluetooth-
enabled device
After successful Bluetooth connection, play
audio on the Bluetooth device.
» Audio streams from your Bluetooth
device to the clock radio.
• You can press to start, pause or
resume play.