Philips AJT5300 - Listen to FM radio; Prepare FM antenna; Tune to FM radio stations; Store FM radio stations automatically

7EN
5 Listen to FM
radio
Prepare FM antenna
For better reception, fully extend and adjust the
position of the pig-tail antenna.
Note
• To prevent interference, position the antenna as far as
possible from any other electrical appliances.
Tune to FM radio stations
1 Press SOURCE repeatedly to switch to FM
tuner mode.
2 Press and hold TUNE - or TUNE + for
two seconds.
» The clock radio tunes to a station with
strong reception automatically.
3 Repeat step 2 to tune to more radio
stations.
To tune to a station manually:
In tuner mode, press TUNE - or TUNE +
repeatedlytoselectafrequency.
Store FM radio stations
automatically
In FM tuner mode, press and hold SCAN for
two seconds.
» All available FM radio stations are
stored automatically.
» Therststoredradiostation
broadcasts.
Store FM radio stations
manually
You can store up to 20 FM radio stations.
1 Tune to an FM radio station.
2 Press and hold PRESET for two seconds.
» The preset number begins to blink.
3 Press TUNE - or TUNE + to select a
number.
4 Press PRESETagaintoconrm.
5 Repeat steps 1 to 4 to store other stations.
Tip
• To remove a pre-stored station, store another station
in its place.
Select a preset radio station
In tuner mode, press PRESET repeatedly to
select a preset station.