8
In addition, all systems provide the capability to
control on-site receiver/driver units including the
AutoDome™ series of integral pan/tilt/zoom/camera
dome series.
All systems contain a logging printer output port to
which an inexpensive RS-232 serial printer may be
attached. This provides a permanent record showing
time and date of changes to the system status such
as:
1. Incoming Alarms.
2. Acknowledgment of alarms by users.
3. Loading of sequences.
4. User log-on to keyboard or console port.
5. Console broadcast message.
6. Console transfer of system tables.
7. Activation of Time Event Functions.
8. Power-up reset message.
9. Video loss message (TC8600 and TC8800
systems only).
The printer may also be used to provide a hard copy
of all user programmed system configuration Tables
and Sequences.
To Next Page
Loading...
