Philips AMF220 - Before the filter replacement alert lights up; Troubleshooting

9EN
English
3 Press and hold the button for
3 seconds to reset the lter replacement
time.
» The lter replacement alert
disappears from the screen.
4 Wash your hands thoroughly after
replacing the lter.
3
3s
4
Before the lter replacement alert lights up
You can replace the lter before the lter replacement alert ( ) lights up. If you do this, you
need to reset the lter lifetime counter manually.
1 Unplug the appliance from the power outlet and wait 10 seconds.
2 Plug the appliance into the power outlet.
3 Within 15 seconds after power on, press and hold the button for
3 seconds to reset the lter lifetime counter.
» The lter replacement alert blinks once after successfully
resetting the lter.
5 Troubleshooting
This chapter summarizes the most common problems you could encounter with the
appliance. If you are unable to solve the problem with the information below, contact the
Consumer Care Center in your country.
Problem Possible solution
The airow from
the air outlet is
signicantly weaker
than before.
• The surface of the lter is dirty. Clean the surface of the lter (see
the chapter “Cleaning and maintenance”).