6 EN
Turning on and o
Note:
• Plug the appliance into the power outlet; do not use a power strip.
• If the appliance is running in heating mode when you turn it o, it continues working for
a few seconds to exhaust the remaining heat.
1 Press to switch on the appliance.
2 The display panel lights up, and appliance shows the PM2.5 level
and temperature.
3 Press to switch o the appliance.
Heater and fan
Light strip
Heater ( )
Low Medium High Red
Fan ( )
Low Medium High Blue
Oscillation
Press the button, the appliance can oscillate at three angles: 60°, 120° and 350°.
Setting the timer
Press the button repeatedly to set operating hours of the appliance. The timer is available
from 1 to 7 hours.
1 hour 2 hours 3 hours 4 hours 5 hours 6 hours 7 hours
To deactivate the timer, press the button repeatedly until all the hour indicators are o.
Setting the child lock
1 Press and hold the button for 3 seconds to activate the child
lock.
» appears on the screen.
» All the other buttons are unresponsive except on/o.
2 Press and hold the button for 3 seconds to deactivate child
lock.
» disappears.
3s
To Next Page
Loading...
