Philips Aqua 7000 Series - Mini TurboBrush maintenance

26
English
6 Lock the nozzle brush roll by securing it until you hear a "CLICK" sound.
Mini TurboBrush maintenance
1 Turn the brush over to access the cleaning area.
2
1
2 Slide the side button to release the brush from its position.
3 Use your hands or a pair of scissors to remove any pollution from the brush.
2
1
4 When reassembling the brush, start by placing one side in position before
attaching the other side. When the brush is properly assembled, you will hear
a "CLICK" sound.