Philips Aqua 7000 Series - Before first use; Installing the wall mount

7
English
17 Mini TurboBrush (XC7055, XC7057 only)
18 Combination tool
19 Soft brush (XC7057 only)
20 Upholstery tool (XC7055, XC7057 only)
21 Crevice tool
Before first use
Installing the wall mount
1 Invert the wall mount and unlatch the gray lever. Insert the charging port,
ensuring the metal part is visible and pointing upright on the front side of the
wall mount.
2 Neatly arrange the cable by tucking it into the designated groove.
3 Close the gray lever. Make sure the gray lever is locked in place with a "CLICK"
sound.
110 ± 2 cm
4 Securely affix the wall mount to your preferred position on the wall, ensuring
that the mounting screw holes are approximately 110 cm from the floor.
Caution: Be careful when you drill holes in the wall to fasten
the wall mount, to avoid the risk of electric shock.