3 Basic Operation
27
Patient Module for ECG/IUP (M2738A)
9 Connector - for connecting ECG/IUP adapter cables (same as for Toco
+
transducer)
10 Cable - connects to any of the four Fetal Sensor Sockets on the monitor
Operating and Navigating
Your monitor has a touchscreen. Everything you need to operate the monitor, other than to turn it on
and off, is contained on its screen. Most screen elements are interactive. Screen elements include
measurement numerics, screen keys, information fields, status indicators, alarms fields and menus.
FM40/50 If an optional external touch display with a MIB interface board are connected to the monitor, you can
operate the monitor using the external touch display.
Screen Elements
Monitor Information Line
1 INOP and alarm status area - shows active alert messages
2 LAN connection status indicator only. RS232 system connection is not indicated. Either the
Monitor is connected to OB TraceVue , the LAN cable is connected but no connection to
OB TraceVue ; or, if no indicator is shown, there is no network connection.
3 Patient identification
To Next Page
Loading...
