7 Admitting and Discharging
85
OB TraceVue: via LAN
Both the monitor from which you are transferring a patient and the monitor to which you are
transferring her must be switched on and connected to the OB TraceVue network during the patient
transfer.
When the monitor is connected to an OB TraceVue system over a LAN connection, the OB TraceVue
system acts as the "master" over patient demographic data. All patient and location-related data that is
visible on the monitor is set, overwritten or updated by the OB TraceVue system. See the OB
TraceVue Instructions for Use for details.
OB TraceVue: via RS232
In contrast to a LAN connection, when the monitor is connected to an OB TraceVue system over an
RS232 connection, the OB TraceVue system has no control over the monitor's patient admission and
discharge functions.
Depending on how OB TraceVue is configured, either the
Last Name, First Name and the bed label, or
just the bed label alone, are taken from the OB TraceVue system. See the OB TraceVue Instructions for
Use for details.
To Next Page
Loading...
