3 Basic Operation
47
10
Now close the paper guide.
11 Press the recorder Start/ Stop SmartKey or the Start Recordng SmartKey to switch on
the recorder.
12 Annotations of trace information are printed on the trace paper (see “Switching the Recorder On
and Off ” on page 49 for details).
Paper-Out Indication
Each pack of paper has 150 pages. The monitor issues a paper-out warning in the status line at the
bottom of the screen, when there are five pages to go. If you switch on the recorder or press the paper
advance key when there are fewer than five pages remaining, it may take two pages before the alert is
activated. Load a new pack in time.
If the recorder runs out of paper, an audible paper-out alert is sounded, if so configured.
Fetal traces continue to be recorded into the monitor's backup memory, and can be retrieved and
printed completely if new paper is loaded within one hour, when the
Bridge Paperout setting is
enabled in Configuration Mode. See “Recovering Traces on Paper” on page 167 for further
information.
To Next Page
Loading...
