EasyManua.ls Logo

Philips AVENT SCD841 - Positioning the baby monitor; Optimal Sound Detection Placement; Parent Unit Range and Feedback; Baby Unit Placement Options

Philips AVENT SCD841
372 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- English 10 -
Positioning the baby monitor
Warning: The cord of the baby unit presents a potential
strangulation hazard. Make sure that the baby unit and its
cord are at least 1 meter / 3.5 feet away from your baby.
Never place the baby monitor inside the baby’s bed or
playpen.
1 
further than 1�5 meter/ 5 feet away from the baby� Make sure that the
baby unit is at least 1 meter/ 3�5 feet away from the baby because of
potential strangulation hazard�
2 Place the parent unit within the operating range of the baby unit�
Make sure it is at least 2�5 meters / 8�2 feet away from the baby unit to
avoid acoustic feedback�



unit until there is no more interference�
3 There are two ways to position the baby unit:
a 
b Mount the baby unit to the wall with screws�
Tip: The wall mount template (see 'Wall mount') to mount the baby
unit to the wall can be found at the end of this user manual�

holes on the wall�
Tip: Position the baby unit at a higher level to get a good overview of
the baby’s bed or playpen�
>1-1.5m/3.5 -5ft
>2.5m /8.2ft

Table of Contents