- English 28 -
Environmental information
All unnecessary packaging has been omitted� We have tried to make
Your system consists of materials which can be recycled and reused
if disassembled by a specialized company� Please observe the local
batteries and old equipment�
Remove the integrated battery
Note: We strongly advise you to have a professional remove the
rechargeable battery�
Only remove the rechargeable battery when you discard the appliance�
Make sure the battery is completely empty when you remove it� Only the
parent unit includes a battery�
Procedure:
1 Remove the 2 rubber feet at the bottom of the parent unit�
2 Remove the 2 screws that are now visible at the bottom of the parent
unit�
3 Put the antenna in upward position and remove the screw in the back
housing that is now visible�
4 Remove the back housing from the front housing by forcing a
screwdriver in between them� For newer versions manufactured after
slide open the battery compartment door�
5 Disconnect the battery connector cable (black-white-red cable)�
6 Remove the 4 screws from the battery holder� No screws for new
versions manufactured after August 2020�
7 Remove the battery�
above the 2 rubber feet�
If there is no collection/recycling system for electronic products in your
battery before disposing the product�
Make sure the product is disconnected from the charging case before
removing the battery�
Warranty and support
www.philips.com/
support
To Next Page
Loading...
