- English 30 -
HOW TO USE / CONNECTING THE UNITS
Why can the charging
time of the parent unit
parent unit during charging to reduce the charging time� When the
take more time�
Why do I need to keep
the baby unit and its cord
at least 1 meter/ 3�5 feet
away from my baby?
always place the baby unit and its cord at least 1 meter / 3�5 feet away
from the baby�
between the various user
modes on the parent
and ECO?
monitor�
the parent unit is still on and connected to the baby unit� The sound level
lights above the screen will light up green when sound from the baby
unit is heard� All normal correspondence with the baby unit is possible via
is no sound detected for 20 seconds (or not enough sound above the
sensitivity setting)� Both display and sound will be activated immediately
when your baby cries and the sensitivity threshold is passed� When the
20 seconds� When one of the control buttons is pressed (brightness or
lullaby menu is accessible�
when no sound is detected for 20 seconds� Eco Mode reduces power
consumption during quiet times while keeping you connected to your
baby� In ECO mode the ECO LED light is green and the device will operate
2 seconds ping mechanism to check the connection with the baby unit
instead of a continuous radio frequency connection� Therefore the Baby
Unit will also consume less energy in ECO mode�
To Next Page
Loading...
