- 11 -
2 Place the parent unit within the operating range of the baby unit�
Make sure it is at least 2�5 meters / 8�2 feet away from the baby unit to
avoid acoustic feedback�
Note: If you use a cordless phone, wireless video, Wi-Fi network,
microwave oven or Bluetooth on 2.4GHz and you experience
interference on either the parent unit or baby unit, move the parent
unit until there is no more interference�
3 There are two ways to position the baby unit:
a Place the baby unit on a stable, level and horizontal surface.
b Mount the baby unit to the wall with screws�
Tip: The wall mount template (see 'Wall mount') to mount the baby
unit to the wall can be found at the end of this user manual�
Tip: Use the provided template to mark the exact location of the
screw holes on the wall�
Tip: Position the baby unit at a higher level to get a good overview of
the baby’s bed or playpen�
4 Adjust the baby unit in a way that ensures the best visibility of your
baby� The baby unit can be rotated to position it in the desired way�
>2.5m/8.2ft
To Next Page