EasyManua.ls Logo

Philips AVENT SCD882 - Features and Settings; Volume

Philips AVENT SCD882
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 12 -
Operating range
The operating range is up to 50 meters/ 165 feet indoors and
300meters/985 feet outdoors. The operating range of the baby monitor
varies depending on the surroundings and factors that cause interference�
Wet and moist materials cause so much interference that the range loss is
up to 100%.
Dry materials Material thickness Loss of range
Wood, plaster, cardboard, glass (without metal,
wires or lead)
< 30cm (12in) 0-10%
Brick, plywood < 30cm (12in) 5-35%
Reinforced concrete < 30cm (12in) 30-100%
Metal grilles or bars < 1cm (0.4in) 90-100%
Metal or aluminium sheets < 1cm (0.4in) 100%
Features and settings
Volume
You can adjust the speaker volume of the parent unit to the level you
prefer�
1 Press the top or bottom part of the control button to adjust the
volume�
Tip: Make sure that the volume is adapted to the current conditions�
The volume bar appears on the display to show the selected volume�
Note: If the volume is set to a high level, the parent unit consumes
more power�
Note: When the volume bar is at its minimum, the volume is muted.
The parent unit shows a mute icon in the status bar and you will only
receive alerts and video from the parent unit�
<300m/985ft
<50m/165ft
17:00