Philips AVENT SCD882 - Preparing for Use; Baby Unit; Parent Unit

- 7 -
Preparing for use
Baby unit
Put the power adapter in the baby unit and the adapter in the wall socket�
Parent unit
The parent unit runs ona built-in rechargeable Li-ion battery.
Follow the below steps to charge the parent unit:
Put the power adapter in the parent unit and put the adapter in the wall
socket�
The battery status light turns orange to indicate that the appliance is
charging�
Note: When the parent unit is o and the power adapter is plugged
in to the parent unit, the display goes on and the charging icon
appears on the display to show that the appliance is charging� After
5seconds, the display will turn o.
When the battery is fully charged, the battery status light turns green
continuously�