Philips AZ1890T - Volume and Sound Adjustment; Adjusting Volume Levels

12 EN
5 Play from
Bluetooth-
enabled devices
With this product, you can listen to audio from
Bluetooth-enabled devices.
Connect a device
Note
• Make sure that your Bluetooth device is compatible
with this product.
• Before pairing a device with this product, read its user
manual for Bluetooth compatibility.
• The product can memorize a maximum of 8 paired
devices.
• Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
• Any obstacle between this product and a Bluetooth
device can reduce the operational range.
• Keep away from any other electronic device that may
cause interference.
Option 1: Connect a device through
NFC
Near Field Communication (NFC) is a
technology that enables short-range wireless
communication between various NFC
compatible devices, such as mobile phones and
IC tags.
If your Bluetooth device supports NFC, you can
connect it with this product easily.
1 Press SOURCE repeatedly to select [BT]
source.
» The Bluetooth indicator blinks.
2 Enable the NFC feature on your Bluetooth
device (refer to the user manual of the
device).
3 Touch the NFC tag (on the CD door) with
the NFC area of your Bluetooth device.
4 On your Bluetooth device, accept the
pairingrequestwith"AZ1890T".If
necessary,input"0000"asthepairing
password.
5 Follow the on-screen instructions to
complete the pairing and connection.
» After successful pairing and connection,
the product beeps twice, and the LED
indicator turns solid blue.
Option 2: Connect a device manually
Note
• The operational range between this product and a
Bluetooth device is approximately 10 meters (30 feet).
1 Press SOURCE repeatedly to select [BT]
source.
2 On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
(refer to the user manual of the device).
3 When [AZ1890T] is displayed on your
device, select it to start pairing and
connection. If necessary, enter default
password “0000”.
» After successful pairing and connection,
the product beeps twice, and the LED
indicator turns solid blue.