Philips AZ1890T - 7 Listen to Radio; Tune to FM Radio Stations; Program FM Radio Stations Automatically; Program FM Radio Stations Manually

15EN
7 Listen to radio
Tune to FM radio stations
Note
• For better reception, adjust the position of the antenna.
1 Fully extend the FM antenna.
2 Press SOURCE repeatedly to select FM
tuner source.
3 Press and hold / for 2 seconds.
» [SEARCH] (search) is displayed.
» The product tunes to a station with
strong reception automatically.
4 Repeat step 3 to tune to more stations.
• To tune to a station manually, press
/ repeatedlyuntilyoundbetter
reception.
Program FM radio stations
automatically
Note
• You can program a maximum of 20 preset radio
stations.
In FM tuner mode, press and hold PROG for 2
seconds to activate automatic programming.
» [AUTO] (auto) is displayed.
» All available radio stations are stored
automatically,thentherststored
radio station is broadcast.
Program FM radio stations
manually
Note
• To overwrite a programmed radio station, store
another station in its place.
1 Tune to a radio station.
2 Press PROG to activate programming.
» [PROG] blinks on the display.
3 Press / to allocate a number to this
radio station, and then press PROG to
conrm.
» Thepresetnumberandthefrequency
of this radio station are displayed.
4 Repeat steps 1-3 to program more
stations.
Select a preset radio station
In tuner mode, press / to select a preset
station.