Philips AZ3831 - Listening to the Radio; Tuning to Radio Stations

14 EN
7 Listen to the
radio
Tune to a radio station
Note
• For optimal reception, fully extend and adjust the
position of the FM antenna.
1 Press SOURCE repeatedly to select FM
or MW.
2 Press and hold / for more than 2
seconds.
» The radio tunes to a station with
strong reception automatically.
3 Repeat step 2 to tune to more stations.
• To tune to a weak station, press /
repeatedlyuntilyoundoptimal
reception.
Program radio stations
automatically
Note
• You can program a maximum of 20 FM radio stations
and 20 MW radio stations.
In tuner mode, press and hold PROG for 2
seconds to activate automatic program mode.
» [AUTO] (auto) is displayed.
» All available stations are programmed
in the order of waveband reception
strength.
» Therstprogrammedradiostationis
broadcast automatically.
Program radio stations
manually
Note
• You can program a maximum of 20 FM radio stations
and 20 MW radio stations.
1 Tune to a radio station.
2 Press PROG to activate program mode.
» [PROG] (program) blinks on the
display.
3 Press to allocate a number (1 to 20
for FM and 1 to 20 for MW) to this radio
station, then press PROGtoconrm.
» The preset number and the frequency
of the preset station are displayed.
4 Repeat the above steps to program other
stations.
Note
• To overwrite a programmed station, store another
station in its place.
Select a preset radio station
In tuner mode, press to select a preset
number.