Philips AZ5740/55 - Password and Rating Management

[PASSWORD]
You can change the four-digit code used as Password.
1 Use the numeric keys ( 0-9 ) to enter your current four-digit
code, then press OK .
The password supplied by default is 0000 .
2 Press , then enter the new four-digit password.
3 press OK to con rm.
Note
If you forget the password, enter ‘0000’ before you •
set a new password.
[RATING]
Restricts access to discs that are unsuitable for children. These
types of discs must be recorded with ratings.
1 Go to [PASSWORD] to enter the password.
2 Go to [RATING] and press .
3 Select a rating level, then press OK .
4 Press the numeric keys ( 0-9 ) to enter the password.
Rating explanations