9 Troubleshooting
Warning
Never remove the casing of this apparatus. •
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this apparatus, check the
following points before requesting service. If the problem remains
unsolved, go to the Philips web site (www.philips.com/welcome).
When you contact Philips, ensure that the apparatus is nearby and
the model number and serial number are available.
No power/No sound
Ensure that the AC power plug of the unit is connected •
properly.
Ensure that there is power at the AC outlet. •
Ensure that the batteries are installed correctly. •
Adjust the volume. •
The le is a non-audio one. Select an audio le. •
No picture
Check the video connection. •
Turn on the TV to the correct Video-In channel. •
This channel is usually near channel 00. Or, you may have »
a button on the TV remote control that selects Auxiliary
or A/V IN channel. See your TV owner’s manual for
details. Or, change channels at the TV until you see DVD
screen on the TV.
Progressive scan is activated but the TV does not support •
progressive scan.
Black and white or distorted picture
The disc does not match the TV color system standard •
(PAL/NTSC).
To Next Page
