Philips AZ5740 - Record from Radio to Tape

Tip
•
When you play or record a tape, the sound source cannot be changed.
• The best recording level is set automatically. Change of volume and
sound effect does not affect recording.
Note
•
The quality of recorded sound can differ depending on the source
and the tape used.
Record from disc to tape
1
Press STOP/OPEN to open the tape door.
2 Load a tape.
3 Push the source selector on the main unit to DISC to select
disc source.
4 Load a disc.
5 Start disc playback.
6 Press RECORD to start recording.
• To stop recording, press STOP/OPEN .
Record from radio to tape
1
Press STOP/OPEN to open the tape door.
2 Load a tape.
3 Push the source selector on the main unit to FM.
4 Adjust VOLUME to tune to the desired radio station.
5 Press RECORD to start recording.
• To stop recording, press STOP/OPEN .
Downloaded From DvDPlayer-Manual.com Philips Manuals