Philips AZ5740 - Listen through Headphone; Product Information; Specifications

Record from USB to tape
1
Press STOP/OPEN to open the tape door.
2 Load a tape.
3 Push the source selector on the main unit to USB.
4 Connect a USB device.
5 Start play the USB device and then press RECORD to start
recording.
• To stop recording, press STOP/OPEN .
Listen through headphone
Plug a headphone into the socket on the unit.
7 Product information
Note
•
Product information is subject to change without prior notice.
Specications
Disc
Laser Type Semiconductor
Disc Diameter 12cm/8cm
Support Disc CD-DA, CD-R, CD-RW, MP3-
CD, WMA-CD
Downloaded From DvDPlayer-Manual.com Philips Manuals