Philips BDP2285/12 - Enjoy Internet Services; Stream Multimedia Via Miracast

7EN
Enjoy Internet services
With this player, you can access online services,
such as movies, pictures and music.
What you need
• Connect this player to the Internet (see
"Setupanetwork").
1 Press .
2 Select a service and press OK.
• [YouTube]: a video-sharing service
• [Netix]: an online subscription service
streaming movies & TV episodes over the
Internet
• [Picasa]: an online photo album
• [AccuWeather]: an online weather
forecasting service worldwide
• [Facebook]: a social networking service
• [Twitter]: an online social networking
service and microblogging service
3 Follow the on-screen instruction and use
your remote control to enjoy the services.
Function Button/Action
Select a service or item.
Conrmaselection. OK
Return to a previous page, or
delete input text.
Return to the home page.
Note
• Netixisavailableincertaincountries.Streaming
membership required. More information at
www.netix.com.
Stream multimedia via
Miracast
Through this player, you can stream audio and
videofromaMiracastcertieddevicetoyourTV.
Before you start
• EnableMiracastontheMiracastcertied
source device, such as a smartphone, a
tablet (refer to a related user manual for
details.)
1 Press .
2 Select [Setup] > [Network] > [Miracast
break-in] > [On].
» Miracast is enabled on this player.
3 Press to display the home menu screen.
4 On the Miracast source device, initiate
the search for this player and select this
player when it is found (refer to the source
device's user manual for details).
• Ifthisisthersttimethese2devices
are paired, an acknowledgement
message is displayed on your TV.
Accept it to continue the pairing.
• To cancel the pairing, press on the
remote control.
5 Wait until the media content from the
source device is displayed on your TV, then
choose the media to start play.
» Audio or video is streamed to your TV
through this player.
• If the connection fails or the
media content does not show
up automatically, select [Setup] >
[Network] > [Miracast role] >
[Group owner], and repeat the steps
above.