Philips BVP528 User Manual

BVP528 HGB
BVP528 BV
BVP518 HGB
BVP518 BV
220 V
400 V
OptiVision LED gen3.5
BVP528/BVP518
1 RG1
*Lumen maintenance at median useful life 50Khrs is L80
© 07/2020 Signify Holding. All rights reserved
Any modication on the luminaire will cancel the warranty
SCx
Performance is not guaranteed for rated NOMINAL mains voltage of below 220Vac and over 400Vac.
Tolerance for voltage uctuations: safety ±10%, performance -8/+6%, is part of the design and as per standard EN 62384.
1/24
Printed in Spain
Data subject to change without notice
Keep for future reference: www.philips.com/lighting
443000021241_A
HGB BV 90º HGB
BVP528 33 26,5 0,47
BVP518 29 22 0,33
Conguration 0º 15º 30º 40º 50º 65º 90º
BVP518 HGB 0,18 0,22 0,25 0,27 0,27 0,29 0,33
BVP518 HGB+ EXTERNAL LOUVER 0,23 0,25 0,27 0,26 0,25 0,25 0,32
BVP518 BV 0,10 0,17 0,21 0,24 0,26 0,30 0,34
BVP518 BV+EXTERNAL LOUVER 0,13 0,18 0,22 0,25 0,25 0,26 0,32
BVP528 BV 0,12 0,20 0,29 0,33 0,33 0,41 0,48
BVP528 BV+EXTERNAL LOUVER 0,14 0,24 0,29 0,31 0,34 0,38 0,44
BVP528 HGB 0,20 0,27 0,30 0,32 0,33 0,41 0,47
BVP528 HGB+EXTERNAL LOUVER 0,23 0,30 0,32 0,32 0,34 0,39 0,44
OPERATING
TEMPERATURE
MAX.
MIN.
OUTDOOR 45ºC -40ºC
INDOOR 45ºC -40ºC

Philips BVP528 Specifications

General

Brand	Philips
Model	BVP528
Category	Lighting Equipment
Language	English

Summary

Luminaire Mounting Positions

Allowed Orientations

Visual guide showing acceptable luminaire mounting angles.

Not Allowed Orientations and Warnings

Visual guide showing unacceptable mounting angles and critical safety warnings.

Installation and Mounting

Screw Mounting Procedures

Detailed steps and guidelines for securing the luminaire using screws.

Important Safety and Usage Notes

Key warnings and operational constraints during installation.

Cleaning Procedures

Cleaning Frequency and Categories

Guidelines for determining how often to clean based on pollution levels.

Recommended Cleaning Techniques

Advice on suitable and unsuitable cleaning agents and methods.

Accessories

Louvre Installation

Instructions for fitting the external louvre accessory.

Precision Aiming Device

Guide for installing and adjusting the aiming device.

Configuration Changes

Gen 3 Bracket Conversion

Steps and components for converting from BV to HGB configuration.

Driver Box Specifications

Driver Box Features

Key electrical and thermal characteristics of the driver box.

Luminaire-Driver Distance

Guidelines for optimal spacing between driver and luminaire.

Electrical Connections

DALI Connection (L < 50m)

Wiring diagram and specifications for DALI driver connections up to 50m.

Mains and Cable Specifications

Details on mains wiring and recommended cable types for connections.

DMX and Electrical Connections

DMX Wiring and Pinout

Instructions for DMX connections, including pin assignments and cable types.

Mains and Connection Box Specs

Details on mains wiring and connection box cable specifications.

Wiring Connection Box

HGB and BV Wiring

Specific wiring instructions for HGB and BV versions within the connection box.

Cable Specifications for Connection Box

Guidelines on cable diameter, voltage, and type for the connection box.

Extended Electrical Connections

Connection for L < 200m

Wiring instructions for driver and luminaire connections over longer distances.

Driver Box Cabinet Installation

Orientation and Spacing

Guidelines for positioning and spacing driver boxes within a cabinet.

Temperature and Humidity Control

Recommendations for managing temperature and humidity for optimal operation.

Driver Box Mast Installation

Mast Mounting Guidelines

Instructions and considerations for installing driver boxes in a mast.

Installation and Circuit Protection

Bracket and Horizontal Mounting

Guidance for installing driver boxes on brackets or horizontally.

Circuit Breaker Capacity

Table showing maximum luminaires per circuit breaker for BVP518 and BVP528.

EU Declaration of Conformity

Declaration Statements

Compliance declarations for radio equipment in various European languages.

Safety Precautions

Disconnect Before Servicing

Essential safety step to disconnect power before performing maintenance.

Basic Insulation Features

Technical description of basic insulation between low voltage supply and control conductors.

Product Usage and Warranty

Safe Storage and Operation

Guidelines for proper storage, installation, and operation of the product.

Torque Specifications and Warranty

Instructions for tightening bolts and consequences of non-adherence to instructions.

Product Handling and Maintenance

Adherence to Instructions and Warranty

Emphasizes following instructions for safe use and maintaining warranty validity.