Philips CAM102 - Initial Setup and Operation; Micro SD Card Installation; Powering On and Off; Configuring Date, Time, and Language

7EN
3 Get started
Load the Micro SD card
1 Flap open the protective cover on the
Micro SD card socket.
2 Insert a Micro SD card (not supplied) into
the socket.
 Ensure that the the Micro SD card is

 Ensure that the metal contact of the
card faces down.
3 Close the protective cover securely.
Turn on
 Press .
» 


» 
mode.
To turn off the camcorder:
 Press and hold
.
» The backlight on the display panel
turns off.
Tip


after being idle for 3 minutes.
Set the date and time



1 Press to highlight [Yes].
» A date setting menu appears.
2 Press / 

3 Press / to change the value of each

4 Press 
» A time setting menu appears.
5 Press / to select the hour and minute

6 Press / to change the value of each

7 Press 
» The date and time setting is complete.
» 
mode.
Select a menu display
language
1
 .
» A settings menu appears.
2 Press / to highlight [Language].
3 Press / to select a language.
4 Press / to highlight [Resolution].
5 Press / 
full HD or standard).