Philips CD280 - Intercom and Conference Calls; Make Call to Another Handset; Toggle Between Calls; Transfer a Call

14 EN
5 Intercom and
conference calls
An intercom call is a call to another handset
that shares the same base station. A conference
call involves a conversation among you, another
handset user and the outside callers.
Make a call to another
handset
Note
If the base station only has 2 registered •
handsets, press and hold to make a call to
another handset.
1 Press and hold . The handsets available
for intercom are displayed.
2 Select a handset number, then press
[OK]toconrm.
The selected handset rings. »
3 Press on the selected handset.
The intercom is established. »
4 Select [Cancel] or press to cancel or
end the intercom call.
Note
If the selected handset is occupied in a call, you •
hear a busy tone.
While you are on the phone
You can go from one handset to another
during a call:
1 Press and hold .
The current caller is put on hold. »
2 Select a handset number, then press
[OK]toconrm.
Wait for the other side to answer »
your call.
Toggle between calls
Press and hold to switch between the
outside call and the intercom call.
Transfer a call
1
Press and hold during a call.
The handsets available for intercom »
are displayed.
2 Select a handset number, then press
[OK]toconrm.
3 Press when the other side answers
your call.
The call is now transferred to the »
selected handset.
Make a conference call
A 3-way conference call is a call between you,
another handset user and the outside callers. It
requires two handsets to share the same base
station.