Philips CD280 - Manage the Area Code; Network Type

22 EN
Activate auto removal of the carrier
code
1 Select [Menu] > [Services] > [Carrier
code], then press [OK]toconrm.
2 Enter the carrier code, then press [OK]
toconrm.
The setting is saved. »
Deactivate auto removal of the
carrier code
1 Select [Menu] > [Services] > [Carrier
code], then press [OK]toconrm.
2 Press [Clear] to delete all the digits.
3 Press [OK]toconrm.
The setting is saved. »
Manage the area code
Note
This feature only applies to models with area •
code support.
Youcandeneanareacode(upto5digits).
This area code is automatically removed from
an incoming call if it matches with the code you
dene.Thenthephonenumberissavedinthe
call log without an area code.
Activate auto removal of the area
code
1 Select [Menu] > [Services] > [Area
code], then press [OK]toconrm.
2 Enter the area code, then press [OK] to
conrm.
The setting is saved. »
Deactivate auto removal of the area
code
1 Select [Menu] > [Services] > [Area
code], then press [OK]toconrm.
2 Press [Clear] to delete all the digits.
3 Press [OK]toconrm.
The setting is saved. »
Network type
Note
This feature only applies to models with •
network type support.
1 Select [Menu] > [Services] > [Network
type], then press [OK].
2 Select a network type, then press [OK].
The setting is saved. »